Inicio > Proyectos Faro > GREENGELAIR

GREENGELAIR

Application of a new “green” sol-gel product using an original, versatile, accurate and in-line mixing device that improves the adhesion of paint on aeronautical sector products

Ámbito
Europeo
Fecha
2013 - 2016
Sector
  • Hábitat
  • Manufactura
Presupesto
281 629
Finanaciador

FP7-JTI

Video

INFORMACIÓN DEL PROYECTO

DESCRIPCIÓN

GreenGELAIR aims at developing a two component sol-gel product to be applied on spray or stick/brush device to improve paint adhesion on large surface for OEM or MRO situations.
It will be done through:
• Development of a new and competitive formulation of sol gel product based on hybrid organic-inorganic system. It will be competitive compared to commercial products regarding induction time, pot life and adhesion on surfaces.
• Design of a versatile device capable of providing a wide and accurate range of sol gel on spray or stick/brush
The Technological objectives are expected to surpass the performances existing in the market:
• Sol gel product
o Reduce induction time below 30 minutes by means of promoters (acid, UV radiation, organometallics). Sonication will be integrated if necessary.
• Increase the pot life beyond 12 h through optimal formulation with organopolysiloxane precursors.
• Application device
• Accurate way to dose different components based on a gravimetric system instead of a volumetric one.
• Design a versatile mixing system based on in-line mixing and recirculation. The system will produce the desired quantity and will be adaptable to spray or stick/brush application
• Design of an integrated cleaning system.
• Evaluation of film
• Define a new testing methodology to evaluate film performances based on electrochemical controls (Electrochemical noise measurements (ENM), Electrochemical impedance spectroscopy (EIS) and Potentiodynamic Polarization Curves (PPC))

The new sol gel product and the device designed will be compared to conventional processes in complex shapes through a demonstration phase. OEM and MRO situations will be considered Brush and Stick applications will be used in MROs scenarios and paint sprayer application will be used in OEMs situations.Corrosion and adhesion tests will be realized to obtain the comparative study of resulting films. Also, morphology and film thickness will be controlled to ensure the adhesion of the film

Impacto

The new sol gel product and the device designed will be compared to conventional processes in complex shapes through a demonstration phase. OEM and MRO situations will be considered Brush and Stick applications will be used in MROs scenarios and paint sprayer application will be used in OEMs situations.Corrosion and adhesion tests will be realized to obtain the comparative study of resulting films. Also, morphology and film thickness will be controlled to ensure the adhesion of the film

Casos de Éxito

-

Entidades

AIMME, UC3M, GALVATEC

DATOS DE CONTACTO

Francisco Bosch Mossi
Sección Tecnologías y Análisis Químicos

AIDIMME

HABILITADOR TECNOLÓGICO

Materiales avanzados y nanotecnologías
High performance materials

-